Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) MSTRFLX TBNG 0.38MM ID 100FT
Masterflex Ismatec Pump Tubing, Tygon E-Lab, 0.38 mm ID; 100 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) ISMTC CHEM/2001 3.2 1.6 25FT
Masterflex Ismatec Pump Tubing, Versilon™ 2001, 3.2 mm ID x 6.4 mm OD; 7.5 m, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 0.44MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 0.44 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LAB 0.76MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-Lab, 0.76 mm ID; 12/PK, Avantor
Braintree Scientific PE10 - Polyethylene .011"""" x .024"""" per ft.,1000 ft. Continu
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Accuflow Systems 1/2 Inch Silicone Hose
1/2 Inch Platinum Cured Braided Silicone Hose 120 Inches OAL
Grainger Corrugated Tubing Nylon 1/2 in 100 ft
The 1/2" Corrugated Loom Tubing by Electriduct is a flexible split loom tubing made of polyethylene and used to bundle and protect wires and cables. It has an inside diameter of 1/2", is sold by the foot, and is available in black color. The tubing features a corrugated exterior which allows it to easily flex and bend. It can withstand temperatures between -20°F to 176°F. The split design allows for quick and easy wire insertion without having to thread the ends. This abrasion resistant tubing helps prevent shorts and damaged wires. It can be used for a wide variety of wiring applications.
Grainger InsulMultitapCon PVC 4 AWG 500 kcmil
The Polaris Insulated Multitap Connector is a heavy duty electrical connector that allows multiple wires to be connected to a single point. It is made of high impact nylon for durability and has an IP68 waterproof rating. The connector has 4 ports that accept wire sizes from 16-6 AWG and is rated for 600V and 30A. It can be used for a variety of automotive, marine, and industrial applications. The unique seal design keeps moisture out. This product is UL listed and made in the USA.
